Every year, on construction sites around the world, tens of thousands of commercial and residential towers are being built. Towers of steel, concrete, and glass of which I see evidenced here in Vancouver every day. Billions of square feet of windows...
From the moment they leave the factory, in transit, and particularly during the long construction process, the glass surfaces and frames are exposed to all sorts of harmful materials and handling that can cause serious and costly damage.
Abrasive materials like splattered concrete, grout, chemicals, paint, and one of the worst culprits, the razorblade scrapers used by window cleaners trying to remove construction debris. All of these things can create expensive problems that force the construction company to replace windows. Until now, construction companies and developers really have had only two choices:
Working with in-house chemical engineers, on-site trades people, home-builders and glass specialists throughout Australia and S.E. Asia, a proprietary and patented new-tech solution was developed: Glass-a-PEEL™ Protective Coating from Clean-a-PEEL™ Temporary Protective Products (manufacturer’s trade name Goop)
Think of the thousands of square feet of plastic film that may be used to try and protect surfaces during construction.
Because of inconsistent adhesion characteristics it’s not uncommon to have sections come away and be blown around the site or even far beyond. This creates an unsightly look both on the building itself and in the surrounding neighbourhood.
Products of this nature significantly add to the millions of tonnes of plastic being added to landfill sites where they remain a serious problem for decades. That’s one of the reasons why such protective plastic films have been banned in many environmentally conscious areas, most particularly in N. America.
Glass-a-PEEL™ was engineered with this growing problem in mind. As a bio-degradable product, there is no negative impact at landfills. There are no caustic or toxic chemicals used in the manufacture of our products.
Glass-a-PEEL™ water-based polymer is applied as the first step in the standard window cleaning and protection process.
Progressive project planners interested in ‘green’ building practices or who are designing their development to meet modern building and environmental standards will want to seriously consider the Glass-a-PEEL™ Protective Coating system.
Perhaps no other group is more affected by the costly problem of damage to glass and cladding that occurs during the construction process.
Whether fair or not, and not withstanding liability debates that may ensue, most likely it will be the construction company or developer who must foot the bill to replace damaged panes of glass.
Why does this keep happening?
As every project rises, glass and cladding surfaces are unavoidably exposed to ‘construction debris’ that ranges from surface-etching concrete splatter, to aggressive sealants, coatings, paints and a wide variety of other chemicals.
Obviously, before occupancy all of these residues need to be removed, but the fact is that they’re not just sitting on the surface where they can simply be wiped off or washed away.
Because of their chemical composition, and the fact the glass, cladding, and other surfaces have be exposed to them for weeks or months, the debris is attached at a molecular level. Removal is extremely difficult or virtually impossible. The damage is already done.
Retrofitting new panes is an expensive, profit-eroding and time-consuming nightmare. Finally, now there’s a simple, cost-effective and environmentally responsible solution! Glass-a-PEEL™ Temporary Protective Coating.
are significantly invested in making sure that every unit that they manufacture meets the high standards that you’ve set for your products.
Once completed, while being temporarily held, during transportation to the construction site, while awaiting installation there and during the overall construction process, windows and spandrel units will be continually bombarded with things that can damage them and compromise their integrity.
These negative impactors include but are not limited to ‘construction debris’ that ranges from surface-etching concrete splatter, to aggressive sealants, coatings, paints and a wide variety of other chemicals.
Some customers may specify a protective film be applied to their orders, many do not, instead hoping that the inevitable damage will be limited or at least manageable in terms of its overall negative financial impact.
Some developers look to window manufacturers to share in bearing replacement costs.
Even if they do specify a protective sheet film be applied, the physical nature of these types of products limit their effectiveness as a barrier plus the adhesive used may create other serious problems when the time comes to remove them.
Worth considering as well, the amount of plastic used to cover the glass surfaces of even a medium sized building has a significant impact on landfill sites, with the plastic persisting in the environment for decades if not longer.
Glass-a-PEEL™Protective Coating provides a superior protective alternative that you can offer to your customers as a valued-added option.
It can be quickly and easily applied immediately before racking and is removed on site when the building is complete as part of the final window washing process.
Damage to high value glass products such as low-emittance (low-e) coated sheets during the many phases of manufacturing is both common and costly.
Every time they’re handled, the unprotected, coated surfaces are at risk of being compromised; one misplaced glove and the sheet could be rendered unusable.
During shipping and even storage they’re further exposed to additional impactors, from changing atmospheric conditions, like increased humidity, to dust and other pollutants, even salt-air mist in some cases.
Protecting such coated, high-value surfaces is difficult because of the sensitive nature of products like low-e coatings.
Glass-a-PEEL™ Temporary Protective Coatings has developed an environmentally responsible, polymer- based, liquid, temporary protective barrier that can be quickly and simply rolled on over products like low-e coatings and easily removed during the wash cycle. Developed specifically for all types of glass and window products, Glass-a-PEELTM dramatically improves resistance to everything from abrasions to chemical misting.
Progressive distributors are always looking for new, unique, value-adding products to bring to their customers and potential customers.
Glass-a-PEEL™ Temporary Protective Products provide a simple, cost-effective, environmentally responsible solution to a growing problem that has been plaguing numerous segments of the glass industry for many years.... Glass-a-PEEL Temporary Protective Coating, all-weather protection for window and glass surfaces.
Click below to download brochureNo media download found.
Your account has been created. Close this popup and you're ready to go!